K & N Filters 57-2519-3 offers the best method to improve your car performance. The cold air intake system stands out for these three reasons; outstanding durability increased performance and sleek design.

K & N Filters 57-2519-3 cold air intake is available in different power coatings and finishes. It has a meticulously engineered aerodynamic tube design that increases torque and horsepower. The cold air intake also works well in improving acceleration and throttle response.

The product is dyno tested and provides over 50% more flow than the OEM intake systems. The cold air intake is a handy option for vehicle owners looking to increase vehicle power.

K&N 57-2519-3 increases horsepower by getting rid of airflow obstruction in the engine. Limitation in airflow between the engine and air filter can rob the engine horsepower. The cold air intake helps drive large amounts of air into the engine and this helps increase power. The Estimated horsepower gain is 10.07 HP at 4945 RPM

The product has state of the art high flow air filter that protects the vehicle’s engine from contaminants.

The filter consists of layers of specially treated cotton gauze placed in the middle of two epoxy-coated aluminum wire screens to achieve durability. The company uses a special grade of oil to treat the cotton gauze layers which creates a stick effect on the cotton microscopic strands making it a powerful filter. The main aim of this is to ensure that your engine is well protected.

The filter is also large enough to fit in the engine compartment using mounting points and factory holes. The filter is protected against exposure to the high engine temperature by a heat shield. The cold air intake kit replaces the whole factory air intake system.

Installation

The kit is very easy to install and maintain. Installation can take as little as 90 minutes. Air filter cleaning must be done after every 100,000 miles. The air filter is compatible with 1996-2004 Ford Mustang GT. Basic hand tools can be used to install the leveling kit. No form of modification is required during installation.

Features

• Easy to install
• Million-mile limited warranty
• Engineered to specific vehicle design
• The air filter is washable and removable
• Free-flowing high-quality polyethylene tube
• Guaranteed to increase horsepower

What’s in the box?

The box comes with one K&N 57-2519-3 second-generation fuel injection performance kit. It includes a washable air filter, air intake tube, heat shields, hose clamps, hoses, hardware, and installation instructions.

Warranty

K&N 57-2519-3 has a million miles or 10 years warranty, whichever comes first from the date of purchase. The warranty covers the product against defects in workmanship and material. It does not cover the product for damages caused by storage, transportation, normal wear and tear, accidents, unauthorized repair, improper use, and failure to follow the instructions manual.

BBK Performance Parts 1718 cold air intake offers the best way to improve your car performance. The cold air intake increases your vehicle power by up to 10%. It also increases acceleration, throtle response, and the overall performance of your car.

This cold air intake for 99-04 Mustang GT is a perfect replacement for the restrictive and unappealing factory stock assembly. The product comes with an unrestrictive intake tube that provides maximum flow to the vehicle’s engine through high flow washable cotton element filters. It restores your vehicle’s confidence by providing more horsepower and torque and the rear wheels without compromising on gas mileage.

BBK Performance Parts 1718 is a cold air intake kit made with a lightweight powder-coated aluminum inlet casting for quality. It is customized to fit in a wide range of trucks and auto applications. The cold air intake kit has gone through and passed emission testing. You can check the product features to get more information on this.

The product is also tested for maximum performance. No modification is required when installing this cold air intake. The tubes are made of aluminum and steel materials. You can choose from a wide range of finish options. The kit fits all 96-04 Mustangs.  It has a heat shield that provides a true cold air charge to achieve the coolest air delivery.

The cold air intake comes with a durable air filter and has an unmatching high flow design to enhance performance. The filter is constructed using a washable cotton element which makes it easy to clean.

This air filter flows up to 75% better as compared to paper filters of the same size. The filter also comes with a new replacement stainless steel clamp which is resistant to corrosion.

Installation

All the appropriate safety equipment and gear must be considered during installation. The company won’t be liable for any injuries caused during installation. In most models, you may need to disassemble the airbox to access the mass airflow sensor. It is a direct replacement bolt-on. The installation process takes about one and a half hours. No special tools are required.

Features

• Heatshield
• Unrestrictive mandrel-bent inlet tube
• High flow, reusable cotton air filter
• Increases torque, horsepower, and throttle response
• Black filter end cap finish
• Silicone hose material

What’s in the box

The kit consists of Fit BBK cold air intake, Blue silicone couplers with BBK logo and exact replacement hardware components

Warranty

The kits are warranted for defects in workmanship or material for one year after purchase. This only applies when the product was installed and used according to the manufacturer’s instructions. If the product is defective, the company will be liable for replacing or repairing the part at no extra cost

Airads 451-204 is one of the best cold air intake for 99-04 Mustang GT that you can consider. The product is designed for high-performance gas applications. It has a one-piece roto-molded air box that is a perfect replacement for the ugly factory design.

The cold air dam design seals directly to the hood separating the equipment from the engine heat. This gives room for cool air to run in the system.

The cold air intake comes with dual-layered synthamax filter that is made with 100% synthetic materials. This helps achieve unrivaled filtering efficiency. The air filter is washable and removable. It is easy to clean these filters. It does not require oil maintenance. All you need is a household detergent to wash and rinse.

The cold air intake is constructed with a hand-poured urethane body that makes it difficult to curl, break, or shrink like other products in the same category. It has a large air inlet that always ensures cold air is flowing through the filter.

The product can help maximize torque, horsepower, and fuel efficiency. It is easy to install using available materials. The cold air intake system has a built-in velocity stack that further facilitates airflow. When you purchase Airaid 451-204, it means that you are getting a product that is easy to install, durable, and unique.

It helps increase airflow while maintaining the right air to fuel ratio. This helps eliminate the need for recalibration after you install the product. . The estimated power gain is 8.11 hp.

Installation

The cold air intake is a bolt and go, so no form of modification is required. Installing this product takes up to 90 minutes. Everything needed for installation is included in the box.

Features

• Washable and reusable filter
• Oil-free maintenance filter
• Lifetime warranty
• Superior horsepower and acceleration gains
• Replaces stock air box/ intake tubing, air filter

What’s in the box

The box has a cold air dam box with seal to the hood, stainless steel clamps, plastic intake tube, installation hardware and instructions, silicone couplers, synthamax filter.

Warranty

The cold air intake has a lifetime warranty. This warranty covers any defects arising from workmanship, material, and performance. The company doesn’t cover defects caused by accidental damages or poor installations.

One of the most cost-effective and easy to install cold air intake is K & N Filters 63-1008. This cold air intake has become so ubiquitous, thanks to its ability to increase vehicle power and torque.

It replaces the restrictive factory air filter and air intake housing of your vehicle. This intake is designed to exponentially reduce intake restrictions by straightening and smoothing airflow. This makes it easier for your vehicle’s engine to inhale larger amounts of air as compared to the factory air filter assembly.

With more air, there is more acceleration and more usable power. The cold air intake has a chrome topped high flow air filter. The filter directs cold air into the engine throttle for more power gain.

The air filter is oversized and can be used for up to 100,000 miles before the need for servicing.

The cold air intake fits Ford Mustang SVT and Ford Mustang GT models. The cold air kit is designed to work on a stock vehicle. But to make maximum use of the kit, other engine systems may need enhancement. For instance, a high-performance computer chip can add extra fuel to the intake. Other items like camshafts, high-pressure fuel regulators, and performance pulleys can also be useful.

Besides enhancing the vehicle’s power, the cold air intake is also affordable.

Installation

It is important to follow all the manufacturer’s instructions when installing the cold air intake. This is because the company won’t be liable for any damage caused during installation. It is easy to install the air intake. Installation time will take between 60 and 90 minutes.

Features

• Guaranteed horsepower gain
• Easy to install
• Replaces entire factory air intake system
• Designed to improve engine sound and throttle response
• Not legal for highway use in some states

What’s in the box

The kit is inclusive of stainless steel clamps, plastic intake tube, installation hardware, filter, and instructions.

Warranty

The cold air intake comes with 10 years or one million miles warranty. The warranty covers defective materials or workmanship to the original purchaser. The commercial-grade air filters have 300,000 miles or 3 years warranty, whichever comes first.