Crane Valve Spring Lock 99078-1
$25.86
Valve Spring Lock; Multi-Fit; Single Groove; 10 Degree Lock Angle; 3/8 Inch Valve Stem; 0.050 Inch More Than Installed Spring Height; Steel; Set Of 32
Out of stock
Description
Crane 10 Degree heat treated, fully machined steel billet, multi-fit locks were designed to allow the retainer to have an increased cross-section in the critical area between the tapered hole for the locks and the valve spring steps. Having greater retainer integrity will now provide a more stable platform for the valve springs, reducing retainer breakage and the possibility of the locks separating from the valve stem under adverse operating conditions. Many competing 10 Degree locks vary in production from 9 Degree to 11-1/2 Degree. Because of the accurate, robust design of Crane locks, they are incompatible with most competitors 10 Degree retainers.
Groove Type : Single
Lock Angle : 10 Degree
Valve Stem Diameter (IN) : 3/8 Inch
Installed Height (IN) : 0.050 Inch More Than Installed Spring Height
Material : Steel
Quantity : Set Of 32
Features
Crane 10 Degree Heat Treated, Fully Machined Steel Billet
Multi-Fit Locks Were Designed To Allow The Retainer To Have An Increased Cross-Section In The Critical Area Between The Tapered Hole For The Locks And The Valve Spring Steps
Provides A More Stable Platform For The Valve Springs, Reducing Retainer Breakage And The Possibility Of The Locks Separating From The Valve Stem Under Adverse Operating Conditions
Limited 1 Year Warranty For Street Use And No Warranty For Race Use
