Edelbrock Camshaft 2281
$446.43 $334.82
Camshaft; Rollin Thunder; Ford Windsor Small Block 5.8L/351 Cubic Inch; Hydraulic Roller; 1500-6500 RPM Range; 235 Degree Intake/ 238 Degree Exhaust Duration @ 0.050 Inch Lift; 0.573 Inch Intake/ 0.582 Inch Exhaust Valve Lift; 112 Degree Lobe Separation Angle; 107 Degree Intake Centerline
Out of stock
Description
Edelbrock Rollin’ Thunder Camshaft # 2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 RPM. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you`ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 449HP and 413 Feet-Pound of Torque when paired with RPM Air-Gap Dual Quad intake manifold and Performer RPM cylinder heads. Must use a high stall torque converter. Will not work with stock valve springs.
Engine Compatibility : Ford Small Block V8 351W Cubic Inch
Recommended Use : Street
Type : Hydraulic Roller
RPM – Low : 1500
RPM – High : 6500
Intake Duration At 0.050 Inch Lift (DEG) : 6500
Exhaust Duration At 0.050 Inch Lift (DEG) : 238 Degree
Advertised Intake Duration (DEG) : 299 Degree
Advertised Exhaust Duration (DEG) : 302 Degree
Intake Valve Lift (IN) : 0.573 Inch
Exhaust Valve Lift (IN) : 0.582 Inch
Lobe Separation Angle (DEG) : 112 Degree
Intake Centerline Angle (DEG) : 107 Degree
Computer-Controlled Compatible : No
Features
Produce Optimum Torque From The Low-End To The Mid-Range
Major Improvement In Throttle Response And Torque
Torque Graphs Showing The Power Gains From Performer Manifolds And Performer-Plus Cams
Must Use A High Stall Torque Converter
Limited 1 Year Warranty