Edelbrock 7106

Description

Edelbrock Part Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP and 434 Feet-Pound. of torque when used with intake and cylinder heads on a 390 engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 RPM. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-RPM horsepower while still maintaining acceptable low-end torque. With 10 to 12 Inch of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.

Recommended Use : Street
Engine Compatibility : Ford Big Block V8 390-428 Cubic Inch
Camshaft Type : Hydraulic Flat Tappet
RPM – Low : 1500
RPM – High : 6500
Advertised Exhaust Duration (DEG) : 296 Degree
Advertised Intake Duration (DEG) : 296 Degree
Exhaust Duration At 0.050 Lift (DEG) : 236 Degree
Exhaust Lift (IN) : 0.572 Inch
Intake Duration Lift At 0.050 Lift (DEG) : 236 Degree
Intake Lift (IN) : 0.572 Inch
Lobe Separation Angle (DEG) : 108 Degree
Includes Lifters : Yes
Lifter Style : Hydraulic
Computer Controlled Compatible : No
Includes Valve Springs : No
Includes Retainers : No
Includes Locks : No
Includes Valve Stem Seals : No
Includes Timing Chain And Gears : No
Includes Assembly Lubricant : No
Includes Pushrods : No
Includes Rocker Arms : No
Includes Gaskets : No

Features

This Hydraulic Lifter Camshaft Is Dyno-Matched To Performer RPM Manifolds For High-RPM Horsepower While Still Maintaining Acceptable Low-End Torque
10 To 12 Inch Of Manifold Vacuum At Idle, Performer RPM Cams Have More Lift And Duration Than Most Street Camshafts
Hardened Steel Construction
Application Specific Design
Limited 1 Year Warranty