MSD Ignition 8998

Description

This tester will check the operation of all of MSD’s single channel CD ignition controls. Once the ignition tests good, you can continue troubleshooting and find the culprit. The tester produces a simulated trigger signal that fires the ignition just as if the engine was running. A special, load-producing clip-on spark plug is included to connect to the coil wire. If the spark is unable to jump the gap of the tester, there is an ignition problem and you can track it down. For racers with our digital programmable 7 ignition controls that are using a non magnetic pickup as sync signal for individual cylinder management, the tester has a circuit to check its operation too. The tester has an LCD display that clearly shows the simulated RPM. This also allows you to test the accuracy of any RPM limits, RPM activated switches, shift light operation and your tachometer. The tester operates on 4, 6 or 8 cylinder engines and will simulate up to 16000 RPM.

Compatibility : 4/6/8 Cylinder Engines And Will Simulate Up To 16,000 RPM
Used For : Testing MSD Capacitive Discharge Ignition Controls
Display Type : LCD
Number Of Channels : Single Channel
Tests Coil Operation : Yes
Tests Ignition Operation : Yes
Tests Rev Limits : Yes
Tests RPM Switch Operation : Yes
Tests Shift Light Operation : Yes
Tests Tachometer Accuracy : Yes

Features

Hand Held Tester Generates A Trigger Signal To Fire MSD DIS, 6, 7, 8 And 10 Series Ignition Controls And The Coil
LCD Display Shows The Simulated RPM And Can Be Used To Confirm The Operation Of Rev Limits, RPM Activated Switches, Shift Lights And Tachometers
Additional Circuit Will Check The Operation Of Cam Sync Signals
Triggers Through Breaker Points, Amplifier And Magnetic Pickup Trigger Inputs From The MSD Ignition
Limited 1 Year Warranty